42 in. Oscillating
Tower Fan w/
Remote Control
OWNER’S MANUAL
Model # FC1-42R-03
cETL 3029200
PLEASE READ AND SAVE THESE INSTRUCTIONS
11) Do not cover the cord or place near heat sources. Keep the cord away from high
traffic areas, and do not submerge in water.
12) Unplug the fan before moving, cleaning or making repairs. NOTE: If for any
reason this unit requires service, return appliance to manufacturer or a similarly
qualified service agent to ensure safety.
13) To reduce the risk of fire or electric shock, do not use this fan with any solid-state
speed control device.
14) To disconnect, grip plug and pull from wall outlet. Never pull on the cord to
unplug.
15) For indoor use only.
WARNING: This fan is equipped with a polarized plug (one blade is wider than the
other). The plug is intended to fit into a power outlet only one way, with the wide blade
in the wide slot. This is a safety feature; if you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug still does not fit, contact a qualified electrician.
DO NOT DEFEAT THE SAFETY PURPOSE OF THE POLARIZED PLUG.
TECHNICAL SPECIFICATIONS
Voltage Rating
Power Consumption
Unit Size
120V, 60Hz
65W (Max.)
13 in. (W) x 13 in. (D) x 42 in. (H)
11 lbs
Unit Weight
3
ASSEMBLY
1. First, put the pillar together. The pillar is made of two separate halves. Make sure
to pass the power cord through the middle of the pillar before snapping the pillar
pieces together.
2. Now, attach the pillar to the fan body using the included pillar screws.
3. Next, put the fan base together. Like the pillar, the fan base is made up of two
separate halves. Make sure to pass the power cord through the middle of the fan
base prior to sliding the base pieces together. There is a groove on the bottom of
the fan base for the power cord. Make sure this groove is aligned with the back of
the fan prior to attaching the fan base to the pillar.
4. Once the groove on the bottom of the fan is aligned, attach the fan base using
the included base screws. Last, pass the cord through the groove on the fan
base.
4
OPERATING INSTRUCTIONS
Set the fan on a stable, level surface. Plug the cord into a standard 120V A/C outlet.
Please refer to Fig. 2 on the next page.
1. POWERING ON THE FAN
The fan can be turned on by pressing the POWER button on the fan control panel or
using the supplied remote control. The POWER button is also used to turn the fan off.
2. FAN SPEED
Press the SPEED button to select Low (L), Medium (M), or High (H) fan speed.
3. OSCILLATION
The fan can operate in oscillation or stationary mode. Press the OSCILLATE button on
the control panel or remote control to start oscillation. To turn Oscillation off, simply
press the OSCILLATE button once more.
4. WIND MODES
Press the MODE button on the fan control panel or remote to select one of the three
wind modes. When the fan is initially powered-on, the default wind mode (normal) is
selected. Press the MODE button once to select Natural wind mode (M1), and twice to
select Rhythm wind mode (M2). During Natural wind mode, the fan will simulate the
airflow of the wind by randomly cycling through its 3 fan speeds. Rhythm wind mode will
cycle through the fan speeds in order of Low, Medium, and High.
5. TIMER
The fan can be programmed to automatically shut-off after a set period of time. The
timer can be set for 30 minute increments. The maximum programmed time is 7.5
hours. To start the Timer, press the TIMER button on the control panel or the supplied
remote. Each press of the TIMER button will increase the timer by 30 minutes. Once the
Timer button is pressed, a green LED light on the front of the fan will light up according
to the selected time. If more than one LED light is lit, the timer is programmed for the
sum of the times represented by the LED lights. If all timer lights are lit, then the fan will
be programmed for the maximum 7.5 hours.
5
Fig. 2
CLEANING/MAINTENANCE
• Turn the fan off and unplug the unit.
• Clean the tower fan and base using a dry cloth.
• Never use abrasive cleaning agents or solvents. This may cause damage or
deterioration to the surface of the unit.
• Do not immerse the fan in any form of liquid. Do not allow water to drip on or into
the fan motor housing.
STORAGE
When not in use, store the fan in a cool, dry location. To prevent dust and dirt build-up,
use the original packaging to repack the unit.
6
WARRANTY
One Year Limited Warranty
Soleus International Inc. warrants the accompanying Soleus Air FC1-42R-03 to be free from
defects in material and workmanship for the applications specified in its operation instruction for
a period of ONE (1) year from the date of original retail purchase in the United States.
If the unit exhibits a defect in normal use, Soleus International, Inc. will, at its option, either
repair or replace it, free of charge within a reasonable time after the unit is returned during the
warranty period.
As a condition to any warranty service obligation, the consumer must present this Warranty
Certificate along with a copy of the original purchase invoice.
This Warranty Does Not Cover
1) Damage, accidental or otherwise, to the unit while in the possession of a consumer not
caused by a defect in material or workmanship.
2) Damage caused by consumer misuse, tampering, or failure to follow the care and special
handling provisions in the instructions.
3) Damage to the finish of the case, or other appearance parts caused by wear.
4) Damage caused by repairs or alterations of the unit by anyone other than those authorized
by Soleus International Inc.
5) Freight and Insurance cost for the warranty service.
ALL WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY ARE
LIMITED TO A ONE-YEAR DURATION OF THIS EXPRESS LIMITED WARRANTY. SOLEUS
INTERNATIONAL, INC. DISCLAIMS ANY LIABILITY FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES AND IN NO EVENT SHALL SOLEUS INTERNATIONAL INC’S
LIABILITY EXCEED THE RETAIL VALUE OF THE UNIT FOR BREACH OF ANY WRITTEN
OR IMPLIED WARRANTY WITH RESPECT TO THIS UNIT.
This warranty covers only new products purchased from our authorized dealers or retailers. It
does not cover used, salvaged, or refurbished products.
As some states do not allow the limitation or exclusion of incidental or consequential damages,
or do not allow limitation on implied warranties, the above limitations and exclusions may not
apply to you. This warranty gives you specific legal rights, and you may also have other rights
that vary from state to state.
For Warranty, Technical Support, Customer Service, Missing or Defective Parts, before
returning to your retailer, please call (888) 876-5387.
Or Write To:
Soleus International Inc.
9451 Telstar Ave.
El Monte, CA 91731 USA
7
|