DVR4-1300
Easy Setup Guide
Easy Set Up Components
Camera Connections
A
B
Connect the camera cable’s BNC
Connect the DC power sockets on the extension
cables to the power splitter’s DC plugs.
socket & DC socket to the BNC
1 plug & DC plug on the extension cable.
3
DVR4-1300 Unit
BNC to RCA Cable
Cameras Optional
Power Adapter
Cable
DVR Power
Adapter
Remote
Control
Cameras and Accessories Optional
Connect the other end of the BNC
plug of the extension cable to the
Connecting the DVR to TV
C
2 camera connections on the back of
Connect the power
the DVR.
splitter’s DC socket
Connect the RCA end of the
4 to the DC plug on
RCA to BNC cable to the
1back of the TV INPUT
the power supply.
socket
Back of TV
Connect the BNC plug end
of the cable to the top
2VIDEO INPUT socket on
INPUT
the back of the DVR
Plug in the DVR and
camera power adapter to
5 power outlets.
Tune your TV to the
Back of DVR
correct INPUT - this is
3 sometimes labelled A/V,
input, source, L1, L2, etc.
- consult TV manual for details
E41300H181110E
Swann Communications • Toll Free Technical Support: USA - 1-800-627-2799, Australia - 1300 13 8324 • Email: [email protected]
|